Universal Car Alarm Keyless Entry System Phone APP Remote Start Kit Push Button Start Stop System Vibration Sensor for SUV

Things buyers must know:

1. The equipment must be connected to the correct power source. The acceptable voltage range of this system is 12V.    If the voltage is too high or too low, the system will not work properly. Only support 12V gasoline car, key ignition car installation.

2. Installing this system requires some professional automotive electronics knowledge.Please read the product manual carefully.   Please pay attention to output signal cables must be connected to the correct signal according to the “+” or “-” on the product manual.  Wrong connections may cause short circuits or burnout of the product.

3. Host central lock control output is “-” negative trigger, when installing, please test the central lock is triggered in what way, if it is not negative trigger, please increase the relay.

4. All products have been strictly inspected before leaving the factory to ensure that they are complete and working properly.  If you have any problems after receiving the product, please contact us immediately.  We will give you the best solution.  Good communication is very necessary , we reject all disputes opened without communication.

5. in addition, The same model name has different suffixes for different remotes, such as SQ888-X5 and SQ888-X7, which are the same modules but different remotes.

   SQ888-S118

    

   Functionality

   1. One-touch start/off

   2. Remote start/turn off

   3. Keyless Entry (unlock the door automatically when you are close to the car, lock the door automatically when you leave the car)

   4. PKE intelligent anti-theft (can not start the vehicle in the car after locking the door)

   5. Tailgate unlocking (need original car support or after adding tailgate motor)

   6. Central door locking automation (automatic locking when starting, automatic unlocking when the engine is off)

   7. LED defense prompt

   8. Side door alarm

   9. Direction light flashing

   10. Negative trigger for center lock output

   11. Remote control learning code pairing

   12. Horn prompt (can be set mute)

   13. Vibration alarm

   Packing List：
   1*Host
   2*Remote control
   1*Vibration Sensor
   1*Ignition Harness
   1*Function harness
   1*LED indicator wire
   2*Low frequency antenna
   1*Ignition button
   1*Learn code button
   Instruction manual

   

1*Host
2*Remote control
1*Vibration Sensor
1*Ignition Harness
1*Function harness
1*LED indicator wire
2*Low frequency antenna
1*Ignition button
1*Learn code button
Built-in Bluetooth module
Instruction manual